Search results

  1. beammeupwelshy

    AVT 275 FX Loop Mod

    Hey. Yep, turn he FX loop levels all the way up for both channels. And yep when the nova isn't in the loop you need to patch the send to the return with a guitar cable or a small pedal patch style cable. Note: I said it before but it's worth saying again in case you don't like it. When...
  2. beammeupwelshy

    AVT 275 FX Loop Mod

    Nice, let me know how it goes. Cheers.
  3. beammeupwelshy

    AVT 275 FX Loop Mod

    Ok, yeah this mod should sort you out. Floor pedals like those have enough gain to make up any loss (if any) since they pretty much work at the same audio level as the preamp does. Then of course after the mod you can choose the amount of wet and dry from the pedal, like it should be. Since I...
  4. beammeupwelshy

    AVT 275 FX Loop Mod

    Hey. Yeah, it disconnects the pre amp and power amp sections, so you physically break that link. This means that you either patch the pre out to FX return or you stick an FX pedal in the loop, either way you have to patch it, as it's now fully serial. However there is an internal signal path...
  5. beammeupwelshy

    AVT 275 FX Loop Mod

    Yep, but just remember that it separates the power section from the preamp section, so if you cut them out permanently from now on you will have to always patch the send to the return either with your pedals or just a cable if not using pedals, and also turn the FX loop knobs all the way up. But...
  6. beammeupwelshy

    AVT 275 FX Loop Mod

    Good stuff. I really don't know why they didn't just make this amp so you can have a serial FX Loop in the first place. I can't imagine a situation where I'd want a parallel FX loop on my amp at all. Every dedicated guitar FX unit has a wet/dry mix and your supposed to send the whole signal...
  7. beammeupwelshy

    AVT 275 FX Loop Mod

    Hope this helps.
  8. beammeupwelshy

    AVT 275 FX Loop Mod

    Yeah cool man, its fairly straight forward. 1 - Pull the amp out of the box. Take a quick second to note where the filter caps are, I don't think these are as dangerous as the ones on valve amps but just don't touch anything near where the IEC cord goes in. 2 - Pull all the knobs off...
  9. beammeupwelshy

    Digitech RP1000 - Who, What, When, Where, Why, and How?

    Yeah I almost got a GT10 cos they seemed pretty good and the price was only a touch more. But I couldn't find any info that told me if you can use this in the 4 cable method with an amp. I know that you can do it cause you just plug it in that way, but what I mean is, are its input and output...
  10. beammeupwelshy

    Digitech RP1000 - Who, What, When, Where, Why, and How?

    Not really familiar with that one. But I think that the RP1000, for the price is a pretty good deal. Granted, its probably not the best out there. I really did want to get that TC system thingy originally, and wasn't that bothered about models, but it was too much coin for me. As for Line...
  11. beammeupwelshy

    Digitech RP1000 - Who, What, When, Where, Why, and How?

    RP1000 4 cable method setup. Step1 – Cabling Guitar goes into RP1000 input. RP1000 Amp loop send goes to Guitar Amp input. Guitar Amp FX Send goes to Rp1000 Amp Loop Return. RP1000 Left output goes to Guitar Amp FX Loop Return. You need 3 cables to go between your amp and the RP1000, and a 4th...
  12. beammeupwelshy

    Digitech RP1000 - Who, What, When, Where, Why, and How?

    Just re-read alot of this thread, I never realised how much of a know it all I sound, Ha ha, what a dick. Anyway I have some more set up tips for the RP1000 just because I modded my amp a little to make it work a bit better and now have a great way to set up a 4 cable method with this thing so...
  13. beammeupwelshy

    Digitech RP1000 - Who, What, When, Where, Why, and How?

    Cool. Yeah there must be solutions for that sort of thing out there. On the extreme end of the scale I guess there are guys like this. Pete Cornish
  14. beammeupwelshy

    Digitech RP1000 - Who, What, When, Where, Why, and How?

    OK, I think thats what your after this time. Not sure if i read your post right but are you saying you may want multiple Preamp signals mixed together? For this you would need a fancy 4 way loop pedal that can mix the loops together, as you can't just combine two or more outputs togther...
  15. beammeupwelshy

    Digitech RP1000 - Who, What, When, Where, Why, and How?

    OK, are you wanting to use the amps by them selfs? So swicthing the RP1000 between the amps FX loops. Kind of like if you had a four amp channles, only in your case you have fours amps instead? That is basically the first drawing but instead of a splitter to feed the power amps you would need...
  16. beammeupwelshy

    Digitech RP1000 - Who, What, When, Where, Why, and How?

    I could be completely off the mark on what you want to do but, those two diagrams are how I think you mean you want to work it. Its gonna hinge on which way you want to go, like do you just want to use the power amp from one amp or do you want to use all the power amps? If I was doing this...
  17. beammeupwelshy

    Digitech RP1000 - Who, What, When, Where, Why, and How?

    Think I got it.
  18. beammeupwelshy

    Digitech RP1000 - Who, What, When, Where, Why, and How?

    How do I attach stuff to a message?
  19. beammeupwelshy

    Digitech RP1000 - Who, What, When, Where, Why, and How?

    Wow, that sounds epic. I take it from the switcher that you only want one amp to work at one time and not all four togther? My guess would be that will get complicated. I will attach a drawing of how i think it should go, but I'm no pro guitar tech.
  20. beammeupwelshy

    Digitech RP1000 - Who, What, When, Where, Why, and How?

    Does that mean you give him your RP355 and and the cash and you get an RP1000 out of it? I dont know how much the US dollar is worth, but if its in good condition and the retail price is a good bit higher than the figure then I'd say go for it. Not 100% but I would imagine that the 1000...

Latest posts



Top