mrjones2004x
Well-Known Member
- Joined
- Mar 30, 2010
- Messages
- 747
- Reaction score
- 1,563
So a friend traded me an old kit guitar he had for a mountain bike I didn’t want.
The pic shows its stock configuration and I wondered what I could do to this? What are my options and if you can link me to an appropriate schematic that would be fantastic.
So I’m thinking I could fit 2 x P90 pickups and make a new scratch plate.
I was thinking to reuse the chrome plates and switches and I’ve got few pots and cap etc.
So what are my options with 3 individual switches at top, I’ll prob add a 3 way toggle I have plus a volume and tone.
Series/ parallel
Kill switch (signal cut)
Any other ideas?
The pic shows its stock configuration and I wondered what I could do to this? What are my options and if you can link me to an appropriate schematic that would be fantastic.
So I’m thinking I could fit 2 x P90 pickups and make a new scratch plate.
I was thinking to reuse the chrome plates and switches and I’ve got few pots and cap etc.
So what are my options with 3 individual switches at top, I’ll prob add a 3 way toggle I have plus a volume and tone.
Series/ parallel
Kill switch (signal cut)
Any other ideas?