Pedal power supply

[Nic9981]

Hi there,

I am looking for a power supply that can power my pedal board. Does anyone have any suggestions?
The pedals are:
-Korg Pitchblack pedal tuner
-Morley Bad Horsie Wah pedal
-Wampler Tweed '57
-Marshall "The Guv'nor"
-Blackstar HT DistX - 16V
-T-Rex Tonebug Booster

They all take a standard 9v battery except the Blackstar, which needs 16v. Is there any one power supply that will work with this set up?

 

[Söulcaster]

The VoodooLab PP2 will cover that...

Peace

 

[Nic9981]

The VoodooLab PP2 will cover that...

Peace

Could I use one of the 18V adaptors to power a 16V pedal?

 

[chadd]

Could I use one of the 18V adaptors to power a 16V pedal?

I would think that it could handle 18V. Most pedals are capable of handling more than 9V of power.

 

[chuckelator]

Voodoo PP2...the only one that exists as far as I'm concerned. They handle 9, 12, and 18v pedals.

 

[Söulcaster]

Could I use one of the 18V adaptors to power a 16V pedal?

One of the outlets is variable, so you won't have a problem.

 

[RazorDave]

Pedal Power is the best, don't think twice. I have seen alot of pros pedal boards, and that sucker is always underneath

 

[HOT TUBES 70]

Or you could be a cheap ass like me and build your own ... LOL !!!!
Not as cool as a Voodoo labs units , but it works ...

 

[Bflat5]

I've heard there's issue with the voodoo and 18v and with some wahs. Not from experience though. MXR DC Brick gets good reviews.

 

[Nic9981]

Well, this is disappointing; I've had e-mails back drect from Voodoolab and Thegigrig and they both say the Blackstar HT drive pedals can't be powered by anything in their respective ranges and I have to use the supplied wall-wart