Search results

  1. D

    2210 FX Loop

    Thanks for the input! I use a G Major rack unit with this and it works ok with this loop- I guess if I could get rid of the hiss I would be happy enough with it to leave it alone. I'll try the simple first, jacks and solder joints. I found this so I can't expect too much out of it...
  2. D

    2210 FX Loop

    I have read a lot of posts in regards to the problem with these FX loops. I have one that works, with lots of hiss and low output level. If I don't use the loop the amp has zero hiss and is great otherwise. Asides from drilling holes and installing a Metro FX loop, Has anyone made any...
  3. D

    2205 2210 Mods Thread!

    I finally got around to trying a 12AY7 in V2- worked perfectly and cured my bleed problem as well. I think I'm going to leave it as is. That tube change made a big difference for the better.
  4. D

    2205 2210 Mods Thread!

    Ricky, I have read through all your posts, You have tried a lot of mods! thanks for sharing all that info. After doing some more tests on the FX loop hiss issue It has come down to the fact that it just doesn't like the analog output from my G-Major 2. I don't get this issue with any other...
  5. D

    2205 2210 Mods Thread!

    Glad to see this 2210 thread going! Lots of interesting ideas for the clean channel, so far the one change I made was to run a 5751 in V2. that made it usable. I plan on making the C40 change as I do have a bit of bleed. One issue I am working on is eliminating a hiss coming from...
  6. D

    1989 2210 cap job

    Thanks for the information. I'll change those and leave it at that.
  7. D

    1989 2210 cap job

    I'm doing some rehabilitation work on an 89 2210. In addition to the 50/50 filter cap cans. Does anyone have a list of the other capacitors and values I should change out on the PCB board? I believe C35-36 are 10uf-160V. Everything on there now is from 89. thanks,

Latest posts



Top