power tubes

  1. d3vCr0w

    Can the Marshall JCM 800 2210 be used as a 50-watt head with only two power tubes?

    Hi people, hope y'all doing great. I was wondering if a Marshall JCM 800 2210 can be used with only two power tubes and if so which ones are to be removed? Has anyone done it? And is there a risk to blow the remaining two tubes from over-current?
  2. T

    Tubes?

    I have a JCM 900 4102. Which Power tubes are good for metal as in Three Days Grace, korn. I am going to use 5881 Power tubes as that is in the Owners manual. I have Sovtek 5881WXT which sound fine but one is very bright. Also, if you can consider I am using an ESP 8-string. I heard a lot of...
  3. D

    JMP 1976 Lead MKII power tubes question....

    Hi! I have a JMP 1976 lead MKII 4 holer Canadian version with EL34. Actually, all of the tubes are newer version of 12AX7 (JJ ecc83) and power tubes (JJ E34L). I want to get back to vintage sound with Mullard XF2 00 getter power tubes. I've found some, but for my amp, do they need to be...
  4. C

    VBA400 issues

    Hi folks. I was going to do some jams with a drumer the other day. Plug in my bass, switch on the amp. To my horror there is barely any sound and the little sound that comes out is verry fuzzy/distorted. Same level of sound no matter what I did with master vol and gain. Did some googling and...
  5. Michael Inglis

    Dsl100hr Froggy Sound Bias At 0mv??

    So the other day I'm playing and all the sudden my sound starts cutting out like my instrument cable is bad. After going through the normal check list I'm certain it's the amp. I get a distorted froggy tone in the 100w position but absolutly nothing at 50w. I've got new power tubes on the way...
  6. Michael Inglis

    Is It A Bad Power Tube?

    Amp: Marshall DSL100HR Problem: No sound, very low millivolt reading on both sides (0-5mv at best), when I go from standby to 100w mode I get a short distorted sound that quickly fades away to nothing. You guys have helped me before so heres to hoping that will be the case again. I'm thinking...

Latest posts



Top