1989 2210 cap job

[davidf556]

I'm doing some rehabilitation work on an 89 2210. In addition to the 50/50 filter cap cans. Does anyone have a list of the other capacitors and values I should change out on the PCB board? I believe C35-36 are 10uf-160V. Everything on there now is from 89.

thanks,

 

[plexifier]

There's probably no need to change all the electrolytic caps if that's what you are considering. Just do the big filter caps and the bias caps (C35 and C36, which you listed correctly).

All the electrolytics are shown on the schematic with a "box and line" like the one below. The "box" side is positive.

schems:
http://www.drtube.com/schematics/marshall/2210prem.gif
http://www.drtube.com/schematics/marshall/2210pwrm.gif

 

[davidf556]

Thanks for the information. I'll change those and leave it at that.