5010 conversion to 2204/1986 - #2

[StingRay85]

Still need to take away a good 5 cm on the headshell, but at least now I can properly test it. That Acoustic 402 cab with JBL speakers will be the last cab I would ever sell

 

[StingRay85]

Still have to patch the tolex, but almost done. 3 mm red plexi was a good choice

 

[StingRay85]

 

[neikeel]

Good stuff.
Bit more interesting as a true p2p than my ‘clone’ 2204 build in the1x12 combo.
The red plexi is a nice touch.

 

[AndyD]

Great project! Well done.

 

[StingRay85]

Performed the last modification. A red LED located inside the head shell between the screen HT supply and the screen grid resistors. Lights up when the standby switch is engaged and tubes are under voltage. Lights up stronger when the screens are drawing current. That's it, all done

 

[playloud]

Very cool project and nice work! The aesthetic is worthy of a sith lord

 

[StingRay85]

For completeness, redid the ht fuse holders, rectifier and impedance switch last week

 

[StingRay85]

One of the coolest features of the amp. The stereo jack socket with 1 ohm resistors, and the accessibility of the bias pot. Great for power tube rolling. Installed a pair of Philips metal base.

 

[StingRay85]

Final schematic. Amp is getting shipped from Belgium to Australia, as my friend is moving