6-Way Footswitch for DSL40CR DSL100HR - Similar to PEDL-91016

[LAAF]

I have a couple of custom built 6-way MIDI footswitches for the DSL40CR and DSL100HR amps. They function much like the PEDL-91016, which are difficult to find.
There are two different chassis options available. Both are available on Ebay and Reverb.

 

[thesunship]

That's cool brother! Post this on the Facebook Marshall groups, there are a ton of them....

 

[Scholly]

How are they difficult to find, though?
You can buy a brand-new PEDL-91016 for around 100 bucks :-o

 

[LAAF]

How are they difficult to find, though?
You can buy a brand-new PEDL-91016 for around 100 bucks :-o

They have been out-of-stock unless something changed recently.

 

[Scholly]

Marshall PEDL-91016 Footswitch

6-Way Footswitch For DSL40CR and DSL100HR, With LED, The 4 channels CLEAN, CRUNCH, OD1 and OD2 are directly switchable, In addition, the foot controller can be used to select between the two master volumes and to switch the FX-LOOP on and off; the...

www.thomann.de

Seems to be in stock just fine?
And since Thomann ships internationaly...

And you can even save 7 bucks by going with B-stock

 

[LAAF]

Marshall PEDL-91016 Footswitch

6-Way Footswitch For DSL40CR and DSL100HR, With LED, The 4 channels CLEAN, CRUNCH, OD1 and OD2 are directly switchable, In addition, the foot controller can be used to select between the two master volumes and to switch the FX-LOOP on and off; the...

www.thomann.de

Seems to be in stock just fine?
And since Thomann ships internationaly...

And you can even save 7 bucks by going with B-stock

It's been hard to find here in the USA.

 

[Scholly]

Fair enough.
Thomann ships to the US no problem, though.

Would the custom-ones work on JVMs, too? Just curious.

 

[LAAF]

Fair enough.
Thomann ships to the US no problem, though.

Would the custom-ones work on JVMs, too? Just curious.

It supports the MIDI codes defined in the DSL manual. Not sure if they are the same on JVMs.

 

[LAAF]

Fair enough.
Thomann ships to the US no problem, though.

Would the custom-ones work on JVMs, too? Just curious.

They say they don't ship to the US.

 

[Scholly]

Huh, that's interesting... So it's a Marshall-specific thing.
Weird.
Well ok, I stand corrected then.
Then awesome that you're offering an alternative!

Would still like to get to the bottom of this. What's up with Marshall-parts lately...

 

[LAAF]

Huh, that's interesting... So it's a Marshall-specific thing.
Weird.
Well ok, I stand corrected then.
Then awesome that you're offering an alternative!

Would still like to get to the bottom of this. What's up with Marshall-parts lately...

Apparently it's more than just this product. Others have been waiting on amps too.