Geeze
Well-Known Member
- Joined
- Jul 25, 2015
- Messages
- 2,919
- Reaction score
- 7,755
I built a couple of TL806's a few years ago and I'm filling up my space with speaker cabs.
This one is canary wood and padauk with BB ply baffle [drilled and cut for EVM12L] and BB back with pine bracing and weighs 26lb unloaded. No wiring harness. The grill cloth can be either black or large check Marshall. If you want something else you are welcome to send it to be installed.
I'm located halfway between Nashville and Knoxville TN and prefer not to ship as I anticipate it to run $50-$60 with materials to secure the cab.
This is a used cab and may have minor scratches in the lacquer finish.
$475
Russ
This one is canary wood and padauk with BB ply baffle [drilled and cut for EVM12L] and BB back with pine bracing and weighs 26lb unloaded. No wiring harness. The grill cloth can be either black or large check Marshall. If you want something else you are welcome to send it to be installed.
I'm located halfway between Nashville and Knoxville TN and prefer not to ship as I anticipate it to run $50-$60 with materials to secure the cab.
This is a used cab and may have minor scratches in the lacquer finish.
$475
Russ
