aspguitars
New Member
- Joined
- Jan 31, 2012
- Messages
- 53
- Reaction score
- 4
Hi! just measured between the jack sleeve and ground (chassis) 0.2Ω
and yes I have some switch spray.
and yes I have some switch spray.
I checked the Bias and the most that I can get is about 13.8 mV which I believe should read about 40-45mv.
I've read that the Electrolytic Capacitors dry out and should be changed after a few years. I'm not sure of the exact year of manufacture, but this DSL 50 has got to be fairly old. Do you think that changing say the C38 and C39 large Caps would get rid of the crackling?
And what would cause the bias readings to be so high?