FS: On Floor Audio Boss SD-1

  • Thread starter Friezel
  • Start date
  • This site may earn a commission from merchant affiliate links like Ebay, Amazon, and others.

Friezel

New Member
Joined
Mar 24, 2014
Messages
16
Reaction score
6
Location
Cary, North Carolina
AS New - in box (used briefly for pedal comparison) - No velcro, no marks - $90 or best offer (cost $130)

On Floor Audio Boss SD-1 modded with the following:

*All caps in the audio path are replaced with top quality metal films .
*All resistors are replaced with audio grade metal films .
*The clipping section is totally reworked in favor of a far warmer , more tube like tone , and is asymmetrical in nature like all tube amps . This includes a blend of specially selected diodes that work together to remove that buzz that is often commented on by players about the SD1 .
*Your SD1 will get a stacked set of JRC4558D op amps w/ chip socket .
*You will notice an increase in the low end response as well as a tighter feel to it , so in short , it will have a lower bottom end , but feel super tight at the same time. You will also notice that it will become more dynamic and touch sensitive with a far more " Amp like" feel and character

email me at kevinolcott@aol.com for detailed pictures

https://www.dropbox.com/s/xn8d9rcaok3z1i1/2014-05-31%2015.10.30.jpg
https://www.dropbox.com/s/ojd8x9tkqnzzu5g/2014-05-31%2015.10.50.jpg
https://www.dropbox.com/s/7mnqp3yyo8rup9q/2014-05-31%2015.11.07.jpg
https://www.dropbox.com/s/nnvcn2evud52lku/2014-05-31%2015.13.06.jpg
 
Last edited:

The Ozzk

Well-Known Member
Joined
Mar 28, 2011
Messages
6,780
Reaction score
7,107
Location
Calgary, AB
AS New - in box (used briefly for pedal comparison) - No velcro, no marks - $90 or best offer (cost $130)

On Floor Audio Boss SD-1 modded with the following:

*All caps in the audio path are replaced with top quality metal films .
*All resistors are replaced with audio grade metal films .
*The clipping section is totally reworked in favor of a far warmer , more tube like tone , and is asymmetrical in nature like all tube amps . This includes a blend of specially selected diodes that work together to remove that buzz that is often commented on by players about the SD1 .
*Your SD1 will get a stacked set of JRC4558D op amps w/ chip socket .
*You will notice an increase in the low end response as well as a tighter feel to it , so in short , it will have a lower bottom end , but feel super tight at the same time. You will also notice that it will become more dynamic and touch sensitive with a far more " Amp like" feel and character

email me at kevinolcott@aol.com for detailed pictures

https://www.dropbox.com/s/xn8d9rcaok3z1i1/2014-05-31%2015.10.30.jpg
https://www.dropbox.com/s/ojd8x9tkqnzzu5g/2014-05-31%2015.10.50.jpg
https://www.dropbox.com/s/7mnqp3yyo8rup9q/2014-05-31%2015.11.07.jpg
https://www.dropbox.com/s/nnvcn2evud52lku/2014-05-31%2015.13.06.jpg

^This man speaks the truth^
 

Friezel

New Member
Joined
Mar 24, 2014
Messages
16
Reaction score
6
Location
Cary, North Carolina
Im sorry to see your selling your OFA SD1 ....

Tubes - No worries on the OFA SD-1. It's a great pedal and the only one that survived my 30 pedal shootout, next to my MIJ SD-1. Recently I have been demoing Klon's and Klon clones with my Friedman and I needed to cycle some of my pedals to make that happen. In the end the OFA SD-1 is a great pedal and I continue to tell people that:applause:
 
Top