Metropoulous Zero Loss fx loop

[Marcomel79]

Does anybody know if George is still selling these?

 

[StingRay85]

5 seconds on google:

Zero Loss FX loop kit

The original and still the BEST! Since Steve Miller discovered the LND150 FET in 2005 and created the circuit that passes full preamp signal to/from external FX, with ZERO loss. This has set the standard. Newly updated Rev 4 adds integrated level switching to the exceptional Zero Loss loop...

store.metropoulos.net

 

[Marcomel79]

5 seconds on google:

Zero Loss FX loop kit

The original and still the BEST! Since Steve Miller discovered the LND150 FET in 2005 and created the circuit that passes full preamp signal to/from external FX, with ZERO loss. This has set the standard. Newly updated Rev 4 adds integrated level switching to the exceptional Zero Loss loop...

store.metropoulos.net

I heard he wasnt making anything anymore, thats why i asked. Whats google?

 

[Matthews Guitars]

It's orderable but note, it's a KIT. The pre-built version is not currently being offered. 85 dollars for the kit. And 70 dollars for the circuit board alone.

 

[Marcomel79]

It's orderable but note, it's a KIT. The pre-built version is not currently being offered. 85 dollars for the kit. And 70 dollars for the circuit board alone.

Actually

 

[PelliX]

Marcomel loves some solid state circuit board work...

 

[Purgasound]

Best loop out there.

If you seek out help on the Zero Loss Facebook group... Don't. There's some asshat that runs his mouth on there saying all the loops are noisy. The kid barely has a grasp on how to work a soldering on. I can't shut him down anymore since he blocked me. LoL

 

[Marcomel79]

Best loop out there.

If you seek out help on the Zero Loss Facebook group... Don't. There's some asshat that runs his mouth on there saying all the loops are noisy. The kid barely has a grasp on how to work a soldering on. I can't shut him down anymore since he blocked me. LoL

The instructions couldnt be any clearer on the site

 

[PelliX]

Best loop out there.

There's some asshat that runs his mouth on there saying all the loops are noisy. The kid barely has a grasp on how to work a soldering on. I can't shut him down anymore since he blocked me. LoL

Reminds me of that bloke who claims the Marshall stock loops do digital downsampling...

 

[Matthews Guitars]

I went to order one last night and did everything but actually send payment. The site clearly said that options were for the kit for 85 dollars or for the bare board for 70. An assembled loop was not among the offerings.
I probably should order up a couple while they're still available.

I blew one up once, it was mounted over power tube sockets and got damaged by stray screen voltage due to chipped insulating epoxy oni the screen resistor. I replaced all the diodes and transistors on it and it still didn't work. I got high voltage on the jacks. That's not right!

 

[PelliX]

An assembled loop was not among the offerings.

Looks to me like it's all pre-assembled apart from the dropping resistors, wire and switch.



It's not rocket science.