Mosfet 3210 Head - Reverb Issue

[Troy T. Blues]

Hello,

My 3210 at times has intermittent reverb. It cuts in and out depending on ? Well not sure. Other than cleaning all the jacks, effects loop, etc ...Is there anything else that I could try to do to recitify the problem? There seems to be some weirdness at times with the input jack. Thank you!

 

[Jon Snell]

A common issue is a broken wire within the tank but, check for poor connection on the phono plugs.

 

[Troy T. Blues]

A common issue is a broken wire within the tank but, check for poor connection on the phono plugs.

Thank you Jon. I believe that I've already checked the connections and they seem to be fine. I will check again though.

 

[Troy T. Blues]

Hello,

My 3210 at times has intermittent reverb. It cuts in and out depending on ? Well not sure. Other than cleaning all the jacks, effects loop, etc ...Is there anything else that I could try to do to recitify the problem? There seems to be some weirdness at times with the input jack. Thank you!

A common issue is a broken wire within the tank but, check for poor connection on the phono plugs.

Jon, I have to open it up to check the connections correct? If so, I did not open it up...my apologies.

 

[Jon Snell]

No worries, yes remove the tank and check the fine little flexible wires feeding the transducers inside the tank, after checking the supply signal leads of course.