mickeydg5
Well-Known Member
- Joined
- Sep 30, 2011
- Messages
- 28,591
- Reaction score
- 16,367
Is there a vaccine for this mono you speak of?
Wait, there is no vaccine for that shit!
Wait, there is no vaccine for that shit!
That member just re-emerged today to berate someone else in that same thread.Volt meter, ohm meter, VOM (volt ohm meter), DMM (digital multi meter) are pretty much synonymous nowadays. All the cheap meters do AC, DC, volts, ohms, and continuity. Cheap to moderate usually don't do capacitance.
One member got confused and irritated when told to use a DMM. Thought it was esoteric jargon, an acronym normal people shouldn't be expected to know.
--------------------
VOM/DMM/whatevers will have a knob or switch that let's you select DC volts, AC volts, DC resistance. Select DC resistance (probably labeled "DCR").
Some have range knobs on them. So you have to know approximately what you're going to measure (tens's of ohms, hundreds of ohms, thousands of ohms). For cabs, select the lowest range.
Some are autoranging, so they automatically adjust. Handy if you expect to measure lots of other things, but not really necessary for measuring cabs.
yeah, it's called stereo... ...Is there a vaccine for this mono you speak of?
Wait, there is no vaccine for that shit!
Stereo Vaccine, good band name if done stereoed.yeah, it's called stereo... ...
What happened? Why is it in the shop?
Now here is what you should have done:At rehearsal it started melting like burning and then one of the 4 valves started turning blue (which isn’t too bad) anyway every time I chugged it flashed blue and then started buzzing and then went all different colours so decided to turn it off before it actually blew the valve.
dirty.
Hello fellow Marshall enthusiasts I’m having a mare here and I hope that someone can just explain this as simply as possible so I understand this.
I have tried to understand ohms and Impedance
Ok, ok, I did go a bit to far with the wasting a beer part.