Schematic for PEDL-91003 footswitch for Marshall Acoustic Soloist AS50D

[ron55]

According to the Marshall website this product (PEDL-91003 2-button footswitch for Marshall Acoustic Soloist AS50D) is not available anymore.
On the website they mention this product PEDL-91003 but in the manual I found following PEDL-10029. Does anyone know the difference?
marshall.com/amps/products/footswitches

Looks like you can still purchase it but it's quite expensive. I wanted to build my own one but don't know the detailed schematic.

I found this replacement product (HRQP hqrp-2button-guitar-amp-footswitch-for-marshall-p802-pedl91003-fits-sv100rh-amps-plus-hqrp-coaste) and ordered it but it does not work for me.
The LEDs switch on/off but the Amp doesn't change it's behavior - switching on/off the Reverb and Chorus.
I looked into the switch and it doesn't have any resistors installed.

Does someone have a schematic which would work with this Amp? Following schematic does not work for me.
The LEDs work but the Amp remains in it's state.


Thanks Ronald

 

[Sgt Rock]

I have a TSL100H (2012 model)
on the bench with the same problem. The PEDL91003, when plugged in, just locks the channels up and wont switch. The LEDs operate correctly
I suspect its not compatible.