I built this guitar a little over two years ago, using an MJT '60 Strat Relic body and a Musikraft custom Fender-style neck. The body was pretty straightforward- just a reliced copy of a 1960 Fender Strat body in alder with a 3-tone sunburst. The neck, however, was purely custom ordered and doesn't really adhere to pre-CBS Fender specs. The neck was ordered as follows:
Strat Neck (2 pc)
Scale: 25.5 Standard Fender
Number of Frets: 21
Nut Width: 1.650 (41.91mm)
Tuner Holes: 11/32 Vintage Kluson Style
Truss Rod: Dual Acting Adjust @Heel
Fretboard Radius: 12"
Fretboard Style: Slab
Nut Slot Style: Fender Flat Bottom
Shaft Wood: Rock Maple
Fretboard Wood: Darker Rosewood (+$25)
Top Dots: Imitation Synthetic Clay Dots
12th Dots: Wide- Pre-'64
Side Dots: White 2mm
Side Dot Loc: Centered on Fingerboard
Fret Wire: Medium Jumbo 6150 Nickel Silver
Fretboard Edges: Semi-Rolled
Back Profile: Charvel Pro-Mod .79-.85
Finish: Thin Lacquer Sealer (+$20)
Nut Install: Install Slotted TUSQ Nut (+$35)
The other specs are as follows:
Genuine Fender 11-hole pickguard, black 3-ply, with aluminum shielding tape underneath
Fender Original '57/'62 pickup set (Formvar magnet wire, Staggered hand-beveled pole pieces, Alnico 5 magnets, and Cloth wiring and fiber bobbin)
Kluson Traditional 6-in-line oval metal button nickel locking tuners (SD9105MN DR/L)
OC Custom Guitars heavy-duty stainless steel neck plate and screws
Switchcraft 1/4" output jack, CTS 250K pots, Orange Drop cap, and CRL 5-position pickup switch
Chrome standard Schaller straplock buttons
Factory-aged Gotoh Vintage-style tremolo with steel block- (GE101TS)
Control cavity painted in shielding paint and lined with aluminum tape.
This guitar sounds MAGNIFICENT and plays like a dream. I hate to part with it, but I have a mountain of medical bills to pay.
Final price drop- $700 shipped & insured via PP Gift, or add 3%
Strat Neck (2 pc)
Scale: 25.5 Standard Fender
Number of Frets: 21
Nut Width: 1.650 (41.91mm)
Tuner Holes: 11/32 Vintage Kluson Style
Truss Rod: Dual Acting Adjust @Heel
Fretboard Radius: 12"
Fretboard Style: Slab
Nut Slot Style: Fender Flat Bottom
Shaft Wood: Rock Maple
Fretboard Wood: Darker Rosewood (+$25)
Top Dots: Imitation Synthetic Clay Dots
12th Dots: Wide- Pre-'64
Side Dots: White 2mm
Side Dot Loc: Centered on Fingerboard
Fret Wire: Medium Jumbo 6150 Nickel Silver
Fretboard Edges: Semi-Rolled
Back Profile: Charvel Pro-Mod .79-.85
Finish: Thin Lacquer Sealer (+$20)
Nut Install: Install Slotted TUSQ Nut (+$35)
The other specs are as follows:
Genuine Fender 11-hole pickguard, black 3-ply, with aluminum shielding tape underneath
Fender Original '57/'62 pickup set (Formvar magnet wire, Staggered hand-beveled pole pieces, Alnico 5 magnets, and Cloth wiring and fiber bobbin)
Kluson Traditional 6-in-line oval metal button nickel locking tuners (SD9105MN DR/L)
OC Custom Guitars heavy-duty stainless steel neck plate and screws
Switchcraft 1/4" output jack, CTS 250K pots, Orange Drop cap, and CRL 5-position pickup switch
Chrome standard Schaller straplock buttons
Factory-aged Gotoh Vintage-style tremolo with steel block- (GE101TS)
Control cavity painted in shielding paint and lined with aluminum tape.
This guitar sounds MAGNIFICENT and plays like a dream. I hate to part with it, but I have a mountain of medical bills to pay.
Final price drop- $700 shipped & insured via PP Gift, or add 3%
Last edited: