BluesDisciple
Member
Got a question...
I get the Clean channel dialed in on my TSL 60 head. Flip the switch to Crunch, and set the volume at about 9 o'clock, and the gain at about 3 o'clock. Expecting a nice, crunchy, voluminous sound. What do I get, a crunchy compressed sound that is about 1/2 the volume of my Clean channel.
Same thing with my Lead channel.
The only way I can get any volume out of either Crunch or Lead is to set either volume at about 3 o'clock and the gain at about 8-9 o'clock. ???
The master volume is low during all of this, at about 8 to 9 o'clock. So, is this how things are supposed to be, or do I have a bad preamp tube or something?
Thanks,
BD
I get the Clean channel dialed in on my TSL 60 head. Flip the switch to Crunch, and set the volume at about 9 o'clock, and the gain at about 3 o'clock. Expecting a nice, crunchy, voluminous sound. What do I get, a crunchy compressed sound that is about 1/2 the volume of my Clean channel.
Same thing with my Lead channel.
The only way I can get any volume out of either Crunch or Lead is to set either volume at about 3 o'clock and the gain at about 8-9 o'clock. ???
The master volume is low during all of this, at about 8 to 9 o'clock. So, is this how things are supposed to be, or do I have a bad preamp tube or something?
Thanks,
BD