cbhuss75
Member
- Joined
- Oct 30, 2013
- Messages
- 35
- Reaction score
- 2
i am attempting to install a new heyboer PT and am having trouble identifying the primary and secondaries on the board. The new PT has a center tap on the b+. Can this be sent to ground?
The Marshall schematic does not call out what voltage each PT output is, only where they connect to the board and the schematic from the new PT is generic and only gives voltage for each lead.
The Marshall schematic does not call out what voltage each PT output is, only where they connect to the board and the schematic from the new PT is generic and only gives voltage for each lead.
Last edited: