Search results

  1. P

    Pulling tubes

    does the bias only go up doing this with a resistor or does it happen with both the choke or the resistor. Bdw mine has a choke and how much does it increase the current by roughly ie does it double it or does it only add a little more current.cheers. Pearse
  2. P

    Biasing

    i have an 80s Master volume and was wondering is there a way of biasing the output valves with just a multimetre without bias probes, and could anyone give any instructions, Cheers. Pearse
  3. P

    Pulling tubes

    hey i know pulling two power decreases the headroom alot and i tend to like it at time but i was told that you also have to set the independance to half the value of the cab. is this true, cheers. Pearse
  4. P

    Delays on a non reverb marshall

    i found my digitech delay i got a while back and thought its sounded very good on its own it really added some fullness to the sound but when i play it in the band it gets lost in the mix an awful lot has any one got any ideas on that ie where to call the line between ambience and when it...
  5. P

    Celestion speakers? Heritage? Greenback's? Vintage 30's?

    i have a 1960 cab with 1968 G12H's in it. They are 25 watts not 30 but there real loud and warm especially when cranked, classic rock at its best.
  6. P

    Delays on a non reverb marshall

    hey thanks lookin forward to hearing your thoughts Pearse
  7. P

    The Tube Cube

    Do you know if the tube cube is a passive or active load or are you saying be careful of passive loads Cheers Pearse
  8. P

    Lotsa Marshall's

    your hearing would definitley be shot anyway, ....along with everything else in that county!!!!
  9. P

    The Tube Cube

    hi im in the middle of chooseing an attenuator and have heard alot about the tube cube any ideas of pros and cons compared to other brands.
  10. P

    Delays on a non reverb marshall

    hi i have a jmp master volume and was thinking of buying a Boss DD3 to add a little reverb to the sound but i want to see if anyone else has done this and did it really make the difference. im aiming at the sound of playing my amp in an echoy room like a church etc. well maybe not that far but...
  11. P

    JCM800 2210 volume issue

    hey was just wondering if the bias could be off when the new tubes were put in. this way the tubes would be runnin cold, or very cold. i had a guy tell me once that eddies brown sound came from actualy turnin the bias down and runinin the tubes cold then turnin the masters volume way up maybe...
  12. P

    What amp do you have had , have or want ?

    i have a marshall JMP 2203 head. real early JCM 800 sound but for much cheaper.
  13. P

    1960A + Roland JC60

    ya stryker is right but check that the speaker out put doesn't say no less than 8ohms cus then you can run it using all 4 speakers on 16 ohms (stereo) and will sound more full. Finally i don't think it is as dangerous playing it through the cab with the wrong independence because it is a solid...
  14. P

    Cabinet Identification

    Hey man see if this helps looks like the cab is of all different dates or at least the speakers are. there still pretty old though. Since 1956, all Celestion chassis drivers have been stamped with a date code (2 numbers and 2 letters), denoting the exact date of manufacture. The...
  15. P

    What Marshall Should I Buy!!!!!!!!!!!!!

    Alot of the guys you mentioned play the JCM 800 model. i have an earlier version of this it 100w but when i play in pubs its up around 4 or so. you could get the 50watt JCM 800 reissue that way you can turn it up slightly louder maybe 5 or near 6 thats the sweet spot but to tell you the truth...
  16. P

    Tubes

    Thanks guys i think il try the jj ECC83 s ive heard alot of hype about them thanks for the help.
  17. P

    Cabinet Identification

    sorry it was 72 when the power rating went to 25w
  18. P

    Pulling tubes: is it harmfull to my amp

    Cheers for the help guys. Pearse
  19. P

    Old Celestions

    They sound amazing too with the amp up around 6, wouldnt play it any higher thow be hard to find someone to re-cone them.
  20. P

    Old Celestions

    I found they were 68. the reason it was confusing was because they flipped the date codes that year so some were printed wrong.

Latest posts



Top