Yeah I knew that wasn't a very academically scheme! Anyway I was thinking too that it wasn't the foot switch...I'll bring the amp to a technician just I can't now because of quarantine...
Hi All!
Can't believe I got all this answers! I guess we all are at home for covid quarantine!
Ok this is the situation:
My amp has a clean channel, an overdrive channel OD1 and an overdrive 2 channel OD2. So if you start from clean channel and you press the left switch on the footswitch (...
Hi
My Marshall DSL-401 JCM2000 has the footswitch not working anymore, here some pitctures:
Any advice on how I can test what is broken with the multimeter?
Thanks
From the DSL 401 power out to the power in of the SE100 I have used a power cable. From the SE100 signal out to the focusrite 2i2 I have used a normal guitar cable (I have even tried with a balanced mono cable but nothing change).
The SE100 doesn't have many things to set, there is just a...
Actually I cannot give me peace about this problem, I can't understand why the SE100 signal out has a so low volume. With this situation it takes a 100 W head to geat a decent volume out and keep the clean channel, clean...
My Focusrite 2i2 board act like a DI itself I think, there is a switch in each imput channel to select from "line" to "instruments", I think that it switch from hi impedence to low impedence. I keep it at "line".
It also there is preamp gain inside the focusrite 2i2 board but if you turn up...
Hi there!
I own a Marshall JCM2000 DSL 401 and a Marshall SE-100 speaker emulator, I mainly use the SE100 to play with headphone my tube amp without the speaker connected but I also recorde silently something time to time.
I have a few problems with the SE100 and I would like to see if...
and the boost gain of the OD2 is still obtained with all tubes distortions? No diode here too?
Anyway I'm preatty much happy with the OD1 tone.I don't use the OD2 that much as I usualy play classic rock and not metal. The claen channel isn't bad but it get distorted easily, expecially at low...
I see, actully I do not know what kind of situation could generate an excessive voltage signal imput.
Also this means that my overdrive chanell 1 it's all tubes distorsion, and even the overdrive channel 2 it's this way even if it doesn't seems because it's basically a boost of gain ( but I...
sorry about the noob question but what does imply having zeners diode inside the fx loop / reverb circuits for overload protection? ( fx loop that I'm not using right now )
Hi there!
I own a Marshall JCM 2000 DSL 401 combo 40W amp and recently I have red a lot about how all tube non-diode sound should be better than distortion with diode ( of course maybe it's a just a non sense matter, I don't know but I'm curious). My amp has a clean channel, an overdrive...
well both the devices that you have indicated to me cost much more than how I would pay for the se100. I think that I'll try to take it and see how it works.
which model do you suggest? As far as I know there isn't that great choice regarding attenuator, expecially at a good price.
There are Weber attenuators which can do both attenuator and have headphone tap exit included but they do cost much much more than what I could pay for the SE 100 (...
Hi there!
I own a marshall haze 40 combo full valve amps and it doesn't have a master volume, sadly. I would like to use it with both headphones when it's late night and with an attenuator in order to have better sound out of it. I have seen that the Marshall Se 100 speaker emulator allow to...
I think that the solution of an attenuator with the headphone tap included should be the best. Actually I don't know the real difference between an attenuator and a headphone tap as I think that both are power-absorber. Anyway your weber attenuator with headphone tap included is much more...