Thanks for the info charveldan.
buddy would teach me how is the proper biasing, i know how to do it but, give me some Technic how to do the proper biasing. Thanks
Thank you.
Do you have any idea for replacement for the tube VLVE-00092 with 46mA..
can you recommend me any replacement for the tube.
i already checked on the internet but the tube VLVE-00092 was not available
Thank you.
Do you have any idea for replacement for the tube VLVE-00092 with 46mA..
can you recommend me any replacement for the tube.
i already checked on the internet but the tube VLVE-00092 was not available
Guys you have any idea where can i buy "VLVE-00092 for my marshall 100H, i decided to replaced them all because the output was very distorted, i have this problem before but i reduce the bias output and solved my problem, i used it 1 to 2 months and it happened again that is why i am going to...
Gunner64 thanks but i have a problem on that,
because my amp tube is VLVE-00092 46mA
i've seen in the internet a lot of tube 00092 but a different mA
so bro can you give me an idea how i'm going to bias if i buy new tube but mA is sample 50mA
how i know if how many mA should i adjust for...
OK the first trouble is No Audio Output.
so i opened the unit and i found out that the fuse on High Tension is Open. Before I replace the fuse I checked first the rectifier diode filter cap if there is shorted, open or maybe leak on them, and everything is good that is why i decided to replace...
i tried to lower down the bias mA but the fuse on the standby keep on blowing . every time i tried to adjust the bias pot the fuse open...
does my tube amp broken . the tube is 7 y.old only
i checked again and it is clearly 60.3mA maybe that is the reason why my Ultra gain is very distorted i can send you the output tune for you ti determined,
bro should i set it on 40ma ? i really need you opinion bro.
Hi guys,
i had a trouble on my DSL100H, I am very confuse because before my amp has no Audio Output
so i checked inside the unit and i found out that the fuse on the standby is blown.
So i replaced it and test it works, but after 5 minutes of playing the output was like shredded, distorted, and...
Anyone can give a code, link or details regard on my Marshall Power tube. I've seen on the tube a code VLVE-00092 on the glass and 46ma 11/31 on the socket.
i am planning to buy a tube to replaced my old tube on my amp because there is no audio output
please help me to get the code or...
Hi guys,
so i have DSL100H Tube amp.
the problem is no output but there is a power.
so i opened the unit and check what is wrong inside on the unit.
I found out that the HT fuse on the standby is open. So before i replace the fuse with a new one i check first the transformer and nothing is a...