astr0z0mb1e2k14
New Member
- Joined
- Feb 21, 2014
- Messages
- 11
- Reaction score
- 11
I have googled but unable to find anything pertaining to my issue....I have tone suck using a Morley volume plus pedal after a wireless system......
I always read that morleys are optical/active. Therefore, can be place anywhere in signal path and won't rob your high end. Instead, sounds like I'm using a passive volume pedal with the wrong impedance for my setup.
My signal path: X2 wireless - morley - patchbay - digitech the drop - wah - pxl live - various pedals in loops - patchbay - amp input
Also, I have tried the pedal in between the pxl live output (buffered output, probably a crappy one) and amp input but still get tone suck.
No issuses of tone suck, for me, prior to adding the morley to the signal path.
Since both routes have buffers and I am still getting tone suckage, what buffer and where is the question.
If you need tech specs on inputs and outputs of devices, let me know and I will provide them
I always read that morleys are optical/active. Therefore, can be place anywhere in signal path and won't rob your high end. Instead, sounds like I'm using a passive volume pedal with the wrong impedance for my setup.
My signal path: X2 wireless - morley - patchbay - digitech the drop - wah - pxl live - various pedals in loops - patchbay - amp input
Also, I have tried the pedal in between the pxl live output (buffered output, probably a crappy one) and amp input but still get tone suck.
No issuses of tone suck, for me, prior to adding the morley to the signal path.
Since both routes have buffers and I am still getting tone suckage, what buffer and where is the question.
If you need tech specs on inputs and outputs of devices, let me know and I will provide them