Building a Ceriatone Dizzy 30 (DC 30)

  • Thread starter Rotorcraft230
  • Start date
  • This site may earn a commission from merchant affiliate links like Ebay, Amazon, and others.

BlueX

Well-Known Member
Joined
May 5, 2020
Messages
2,659
Reaction score
5,610
Location
Sweden
Few more pics. Man it got tight in a few areas, I worked through it though.View attachment 144751View attachment 144752
That's a busy board, still looks super clean the way you build. I like how you lowered one resistor where three meet a fourth (at the PI). Might borrow that idea.

Worked on the power amp side last 2 nights.
I upgraded the 2 large resistors. They were the white ceramic bricks, I think they were ugly, these Ohmites are much better looking.View attachment 144877View attachment 144878
Those Ohmites definitely look better, particularly in this environment.
 

Rotorcraft230

Well-Known Member
Gold Supporting Member
Joined
Aug 15, 2019
Messages
1,054
Reaction score
1,394
Location
Brazoria County Texas
I like doing the turret board, I will not let components touch so some thinking is involved. Sometimes you have to put components on a little further to see if you can find room, sometimes you can’t and have to drop them down. Visually appealing is important to me as well throughout the whole amp but also keeping in mind which wires may react each other. It’s a mind game kinda. Big giant puzzle.

This is my first amp that doesn’t have 34s or 6L6s, I’m liking it.
 
Top