This is on a 50W Marshall style output transformer. I used my VariAC and had/measured 9VAC feeding the supposed 8 ohm tap on the secondary. This gave me 151VAC on the primary winding.
151/9 = 16.77 ratio.
16.77 squared = 281
281 X 8 = 2248 load resistance
Is this close enough regarding these specs? I was expecting to see something closer to a 20 to 1 ratio.
151/9 = 16.77 ratio.
16.77 squared = 281
281 X 8 = 2248 load resistance
Is this close enough regarding these specs? I was expecting to see something closer to a 20 to 1 ratio.