velcro?

[ricksdisconnected]

ok guys. we have been over this before but i cant find it.
what "velcro" stuff are you using to put your pedals on the board.
tired of the weak ass crap from wal mart.

 

[anitoli]

Home Depot:

https://www.homedepot.com/s/velcro?NCNI-5

They have all different kinds.

 

[IOSEPHVS]

We're supposed to use Velcro?

 

[Seanxk]

3M Dual Lock , it's not cheap but works. Same design I think as the old Ampeg grip pads for grills etc.

 

[South Park]

Weapons grade military specs for me

 

[Trouble Free]

Weapons grade military specs for me

you must use this kind......

 

[ricksdisconnected]

Home Depot:

https://www.homedepot.com/s/velcro?NCNI-5

They have all different kinds.

i didnt see any of the better stronger stuff. do you know which
one?

 

[ricksdisconnected]

3M Dual Lock , it's not cheap but works. Same design I think as the old Ampeg grip pads for grills etc.

that stuff is $100 plus

 

[Filipe Soares]

velcro outdoors titanium, works great you can find it at home depot.

 

[Drinkingdeath01]

Velcro for the pedal board? Never thought of that. Sounds better then my bungee cords and used bubble gum.

 

[ricksdisconnected]

but does it work? lol

 

[anitoli]

but does it work? lol

Absolutely. You will have great difficulty just pulling a pedal off to swap it.

 

[WellBurnTheSky]

3M dual lock definitely. The SJ3560 is the one to get. And it's not that expensive, since you only use small pads (else you'll need a crowbar to remove the pedal from the board).
https://www.amazon.com/dp/B00AQ6IS1...&colid=H9ZIYGJWJ2O&psc=1&ref_=lv_ov_lig_dp_it
A 10ft roll is more than enough for a big pedalboard (say, a Pedaltrain Pro).

 

[Sapient]

Rick: Ditch the velcro and try this method. It's great, but a little more work. Neat as f too. Trace out the pedal and cut a little smaller into 1/2" gym-foam rubber ..same for case fitment in general. Here's a pic of mine that is quite simple. (looks a little tattered here because I was refitting and messing with it.)

Let me know if you want me to send you a chunk of foam like this and I can hook you up.

 

[IOSEPHVS]

Absolutely. You will have great difficulty just pulling a pedal off to swap it.

Especially the 15 pound ones.

 

[mirrorman]

I use tie wraps...Velcro is tone sucking crap.

 

[ricksdisconnected]

Rick: Ditch the velcro and try this method. It's great, but a little more work. Neat as f too. Trace out the pedal and cut a little smaller into 1/2" gym-foam rubber ..same for case fitment in general. Here's a pic of mine that is quite simple. (looks a little tattered here because I was refitting and messing with it.)

Let me know if you want me to send you a chunk of foam like this and I can hook you up.

very nice. do they fall out in transport?

 

[TXOldRedRocker]

you must use this kind......

Was there Velcro in that video?

 

[ricksdisconnected]

3M dual lock definitely. The SJ3560 is the one to get. And it's not that expensive, since you only use small pads (else you'll need a crowbar to remove the pedal from the board).
https://www.amazon.com/dp/B00AQ6IS1...&colid=H9ZIYGJWJ2O&psc=1&ref_=lv_ov_lig_dp_it
A 10ft roll is more than enough for a big pedalboard (say, a Pedaltrain Pro).

i like this

 

[Sustainium]

I recently made a larger board and attached Velcro a little different this time since it doesn’t stick to the rubber backing on some pedals. Once in place it holds well and doesn’t rely on the Velcro sticking to the rubber backing.