I’ve completed another cab build…at least the construction part. Thank you to those who may have helped me along the way. Here’s the link to that thread: https://www.marshallforum.com/threa...blem-baffle-cutout.124659/page-2#post-2227109
anyhow. It’s a 212. It’s 29.5”x18.25”x11.25”. 1” (3/4”) pine panels and frames with 15/32” birch ply baffle and back panel. I used rabbet joints on the sides and top and bottom panels.
It’s not loaded or wired up yet. I haven’t decided on the speakers. I have a few available but no two that I would like to pair and that have matching impedance. Ideally I would prefer two identical speakers.
anyhow. It’s a 212. It’s 29.5”x18.25”x11.25”. 1” (3/4”) pine panels and frames with 15/32” birch ply baffle and back panel. I used rabbet joints on the sides and top and bottom panels.
It’s not loaded or wired up yet. I haven’t decided on the speakers. I have a few available but no two that I would like to pair and that have matching impedance. Ideally I would prefer two identical speakers.