Sirena
Member
- Joined
- Oct 13, 2019
- Messages
- 22
- Reaction score
- 53
I removed the back panel to the Code 50 and began to disconnect and unscrew things.
This is the main amp part. I thought about reusing some of the wires, but nothing was either long enough that was the correct colour, or large enough.
I mounted everything with much larger wire, installed a switchcraft input jack and housing ring, and have painted a piece of gutter screen (to install where the control panel was) bronze to match the Origin's rear screen. I'm probably going to remove the blue paint as even though it's my fav colour, it's not a hard finish and is coming off.
I'm thinking about installing a Celestion Vintage 30 8 ohm in it since the power rating is 10w under the max power of 50w with my Origin 50.
This is the main amp part. I thought about reusing some of the wires, but nothing was either long enough that was the correct colour, or large enough.
I mounted everything with much larger wire, installed a switchcraft input jack and housing ring, and have painted a piece of gutter screen (to install where the control panel was) bronze to match the Origin's rear screen. I'm probably going to remove the blue paint as even though it's my fav colour, it's not a hard finish and is coming off.
I'm thinking about installing a Celestion Vintage 30 8 ohm in it since the power rating is 10w under the max power of 50w with my Origin 50.
Last edited: