(mod note: this was extracted from the CODE thread to discuss these specific topics)
Got my CODE25 to record demos in the house with. This replaced Mustang that i was using however I've got an SL5 and use JCM800 & JCM900 to record with so want something that had a more Marshall tone for demos in the house.
Sounds great when playing it straight but when i goto record with the USB port there is this strange static.
Cable is fine, gain staging is same as the Mustang and set up in Logic is exactly the same.
Strangest part of the whole thing is that it passes in and out as you record through USB but doesn't affect sound through amp.
Have a listen.
https://www.dropbox.com/s/r9drhipecjskno0/distortion example distorted.mp3?dl=0
Then this is the lead part with absolutely no distortion.
https://www.dropbox.com/s/2vg64b3c1ohxpj1/distortion example clean.mp3?dl=0
Got my CODE25 to record demos in the house with. This replaced Mustang that i was using however I've got an SL5 and use JCM800 & JCM900 to record with so want something that had a more Marshall tone for demos in the house.
Sounds great when playing it straight but when i goto record with the USB port there is this strange static.
Cable is fine, gain staging is same as the Mustang and set up in Logic is exactly the same.
Strangest part of the whole thing is that it passes in and out as you record through USB but doesn't affect sound through amp.
Have a listen.
https://www.dropbox.com/s/r9drhipecjskno0/distortion example distorted.mp3?dl=0
Then this is the lead part with absolutely no distortion.
https://www.dropbox.com/s/2vg64b3c1ohxpj1/distortion example clean.mp3?dl=0
Last edited by a moderator: