nobbydog
New Member
- Joined
- Jul 27, 2015
- Messages
- 24
- Reaction score
- 11
OK so being new to the whole band experience I'm learning every week about my tone, how it forms part of the overall mix etc etc. However I just cant get something easy to set up (and leave until needed) for my lead breaks. So, 602 with the crunch channel set around 3/4 and the lead set at max. I figure that when I hit the lead channel it would give me the boost needed to cut through. Yes its 'louder' but doesent seem to stand out somehow.
Am I getting tied in a knot over nothing or is there something on the amp I'm not quite setting up correctly.
Any advice/experience welcome - just thought this would be a good place to throw it out there. And if its just a case of goin louder then so be it (really, not a problem - loud is, of course, good! )
Am I getting tied in a knot over nothing or is there something on the amp I'm not quite setting up correctly.
Any advice/experience welcome - just thought this would be a good place to throw it out there. And if its just a case of goin louder then so be it (really, not a problem - loud is, of course, good! )