Plug a DSL 100HR into a UPS unit

  • Thread starter Adrian Stoican
  • Start date
  • This site may earn a commission from merchant affiliate links like Ebay, Amazon, and others.

Adrian Stoican

New Member
Joined
Oct 27, 2020
Messages
13
Reaction score
13
Hi,

I have some electrical power fluctuations, also some unexpected power down so I was thinking to plug the amplifier into a UPS unit (e.g. CyberPower BR1000ELCD, 1000VA, 600W)

Q: is it ok or the amplifier will be damaged if used in this way ?

Thanks in advance!
 

Mitchell Pearrow

Well-Known Member
VIP Member
Joined
Jul 2, 2018
Messages
19,152
Reaction score
43,296
Location
Moreno Valley CA
Hi,

I have some electrical power fluctuations, also some unexpected power down so I was thinking to plug the amplifier into a UPS unit (e.g. CyberPower BR1000ELCD, 1000VA, 600W)

Q: is it ok or the amplifier will be damaged if used in this way ?

Thanks in advance!
:welcome: To the forum
I think it would be fine , but use a heavy gauge extension cord,( not lamp cord)
Cheers

Mitch
 

Adrian Stoican

New Member
Joined
Oct 27, 2020
Messages
13
Reaction score
13
Hi,

I have some electrical power fluctuations, also some unexpected power down so I was thinking to plug the amplifier into a UPS unit (e.g. CyberPower BR1000ELCD, 1000VA, 600W)

Q: is it ok or the amplifier will be damaged if used in this way ?

Thanks in advance!

Thanks for the answer !
 
Top