PelliX
Well-Known Member
- Joined
- Jun 16, 2020
- Messages
- 7,219
- Reaction score
- 14,673
1. Do any of you have pictures of what a repair like this should look like?
Google images for "fix trace pcb". There are different ways of going about it. Bridging the trace with a piece of wire, flooding the track with solder after exposing it, bypassing that trace entirely (presumably with wire or a component otherwise located "on" the trace), etc.
2. Approximate cost to have it redone correctly?
$50 - 100 seems a reasonable range, but I do my work myself. Where are you located; I'd charge two Guinness for that one.