• We are looking to make improvements to the Classifieds! Help us determine what improvements we can make by filling out this classifieds survey. Your feedback is very appreciated and helpful!

    Take survey

Search results

  1. 0

    wiring question - 1935B cab

    thanks :)
  2. 0

    wiring question - 1935B cab

    in one of my previous posts i was asking if the entire wiring has to be removed and i think reading once about speakers not liking DC voltages applied..? i've never done it before, so naturally i won't start experimenting on 50 year old speakers. at least not until i find the time to research...
  3. 0

    wiring question - 1935B cab

    thanks for the input, i'll take care of it one day... care to point out what's not well with the current wiring, besides speaker pointing in wrong directions? cheers
  4. 0

    wiring question - 1935B cab

    thanks, but i'm already sure that the wiring now matches 100% with the series-parallel drawing i posted in my op. bit unsure after kuli's post stating switched polarity on an original, but i'm pretty confident after firing it up yesterday that everything's fine and there's no weird phase issues :)
  5. 0

    wiring question - 1935B cab

    i didn't even plug it in as it's my first venture into pulsonic land and i was nervous af :)
  6. 0

    wiring question - 1935B cab

    thanks kuli & ken. would i have to remove all the wiring? not sure, but isn't DC bad for speakers? gonna give it some more listening today, but honestly can't imagine some phase issues given the sound...
  7. 0

    wiring question - 1935B cab

    yep, might adress that one day... for now it sounds just glorious as is :) lord have mercy
  8. 0

    wiring question - 1935B cab

    yea, did it and it reads 14.4 ohms now... thanks again for lending me a second pair of eyes, really appreciate it :) time to put them through their paces!!
  9. 0

    wiring question - 1935B cab

    yeah, it's bit hard trying to get all 4 speaker connections on a single shot... black wire coming up from the jack is going to the ´+´ terminal. black wire from ´-´ terminal goes up to the speaker above...
  10. 0

    wiring question - 1935B cab

    hehe, thanks for your patience. printed the drawing, sat before the cab and nope, it's not correct. i think i'll just heat up the soldering iron... built amps that serve me well for years, but really didn't want to touch there :D i marked in blue the terminals that are soldered...
  11. 0

    wiring question - 1935B cab

    thanks again, still not sure what to do :p red on the right bottom side is not the return from the speaker above but directly connected to the "-" terminal of the jack... everything else fits the wiring according to the scumback drawing - except this bottom right speaker (top right on the drawing).
  12. 0

    wiring question - 1935B cab

    thanks mate, reads fine: 13.8 ohm... jack and everything else is wired just like the scumback series-paralell drawing. is this one speaker gonna be oop?
  13. 0

    wiring question - 1935B cab

    hey gang, just received this pretty thing and saw the wiring differs from what i've seen after a quick search: bottom right speaker seems to have the wires switched - connection coming from the jack should go to - terminal of the speaker; + should go to the - terminal on the speaker above...
  14. 0

    possible 1972 1935B cab - need your help to clarify

    thanks for your reply mate! yeah, i was already on your page to date the speakers. i was just a bit unsure because it's stated that the stickers should be correct for the 'Rola Celestions'... but good to hear a trusty source who has experienced 'wrong stickering' with these too :)
  15. 0

    possible 1972 1935B cab - need your help to clarify

    hey all, i need your help - i'm looking at purchasing an early 70's 1935B cab. vendor claims it's coming with its original speakers - G12M 55HZ; T1511 stamp on frame, still waiting on confirmation if the stamps on the cones are the correct ones (should read 102 014 if i'm correct...). one pic of...
  16. 0

    Vintage 1960 A/b Dimensions

    thanks guys, that helps a lot. @bygone tones: i already saw george's homepage, but didn't think about contacting him - good idea! btw. already saved your site... yummie ; ) @pulsonicsound: thanks again brother, that helps a lot!! definitely agree with you on speakers, and yes, your example...
  17. 0

    Vintage 1960 A/b Dimensions

    thanks a lot, that's what i'm after - exact dimensions would be great, also radius and every other tiny aspect is greatly apreciated : ) with "cheaper to just buy a vintage cab" you mean the marshall reissue cabs? anyway, i'll need most of the necessary tools for other works as well, and like...
  18. 0

    1970 Slant Refurb

    any story worth telling how you ended up with gerry's cab?
  19. 0

    Vintage 1960 A/b Dimensions

    nope, they don't and i don't plan to do so... all i want is an acurate box out of whatever with 4 g12m's ; ) cheers
  20. 0

    Vintage 1960 A/b Dimensions

    thanks mate, but got everything from 1x8 to 2x12 covered... played a friend's halfstack couple days ago and it just reminded me how much they knock. something i don't feel with my 212 ...and leo put necks on planks... didn't stop the 60s & 70s from happening music wise ; ) cheers

Latest posts



Top